Han Machinery CO.,LTD

Han Machinery CO.,LTD
Contact Us

Name: Ethan Han
Mobile: +86 13451681780
E-mail: info@hanmachinery.com
Add: No.2 Jiayuan Road,Suzhou city,Jiangsu province,China

Easson Sino Rational sobek

UWC3200 Controller for Manual Vision Measurement Machine

UWC3200 Controller for Manual Vision Measurement Machine

Product name:UWC3200 Controller for Manual Vision Measurement Machine



UWC3200 is including the encoder / linear transducer counting, touch probe latch, illumination control, Z axis motion control, using a USB cable connecting to the PC, supporting the 32 bits and 64 bits operation system. UWC 3200 offers a One Case solution for manual vision measurement machine, it is smarter, lower cost, better performance and more stable comparing to the traditional manual VMM controlling system.



1. 3 axis linear scale counting, able to connect to the single-ended (TTL) or difference (RS422) square wave signal linear scale of any brand.


2. Programmable surface lighting function, able to connect to 4 sections, 8 sections (100mA/section) or one section (300mA) surface light.


3. Programmable contour light, able to connect to a single LED light with 1.6-3.5V working voltage, or a multiple LEDs light with 6-11V working voltage.


4. Co-axial light / laser indicator function, able to connect to varies co-axial light of 3.3-5V working voltage.


5. The software adjusting range of the brightness of the illumination is 0-200; the surface light hardware adjusting level is 1-16, 1-20 for the contour light and co-axial light. When the software adjusting is in a certain level, for example 200, change the hardware adjusting level will increase or reduce the real current running.


6. Z axis CNC motion control function, pulse direction signal output, which is including jog, point to point, homing, MPG motion controlling mode. The point to point motion mode is an advantage to the Z axis fast focusing.


7. Touch probe interface, the hardware will latch the 3 axis linear scales data in real time. When the Z axis is with CNC control, the Z axis will auto retreat after the touch probe touching point.


8. MPG following function, use the MPG to control the Z axis traveling speed and distance; MPG speed range: 0.1um/s-10mm/s. When using the MPG control, the maximum surface light section is 4.


9. Using the optoelectronic isolated USB data communication, to ensure the anti-jamming performance and communication stability. Eliminates the losing signal problem. Supporting the Windows XP, Win 7, 32 bits and 64 bits operation system.


10. The API is designed based on the vision measurement machine and coordinates measuring machine application. Only several API should be needed to complete all the operation. The UWC 3200 professional debugging software will complete the complicated parameters setting and motion adjusting operation. The API supports multiple lines programming,


11. Working power: 12VDC, the rated working current is 0.5A without connecting to the illumination. It is able to use the PC power supply for the power source.



Power supply Without surface light control 12VDC+5%@0.5A(max)
With surface light control 12VDC+5%@1.5A(max)
Linear scale counting Counting axis 3 axis
Interface definition Sino type:Sinpo, Sino, Changchun optoelectronic 9BD connector
Rational-WH type:Rational 9BD connector
Power output capability 5.0-5.15V@0-130mA/axis, if the linear scale power is more than 130mA, do not connect the scale VCC to the UWC3200, but external 5V power supply is required.
Signal type (compatible) RS422, signal cable length less than 20M
TTL, signal cable length less than 10M
Input frequency RS422:<6.5MHz
Resolution @ moving speed: 1um@6.5M/S,0.1um@650mm/S
Resolution support: 10mm—— 0.05um
Motion control Controlling axis 1 axis(Z axis)
Close-loop control policy PID+VFF+ dead band
Servo refresh frequency 2KHz
Speed planning S type speed curve
Anti mechanical shock, speed optimization SMART mode
Touch probe processing The controller is not processing, but only sets a sign position, the software will do the stop/retreat.
Close-loop control axis Z
Open-loop control axis Z
Output signal frequency 0—400KHz
Output signal electrical parameters


Triode electrode open circuit output

Locating accuracy When the resolution >=1um, +-2 grating counting pulse equivalent
Compatible transmission structure type

Ball screw, leaner drive

synchronous belt / iron belt

Ladder ball screw

Lighting control Controlling mode Common positive pole constant current drive
Surface light output capability

One section: 300mA@0-11V

4 sections: 100mA@0-11V /Channel, user made ring light

8 sections: 100mA@0-11V /Channel, compatible with UWC4003B

Contour light output capability 100mA@0-4V or 6-11V
Co-axial light output capability 100mA@0-4V or 6-11V
Software brightness adjusting range 200 levels
Hardware brightness adjusting range Surface light: 1-16, bottom light and co-axial lighe: 1-20
Working condition Storage environment -20~80℃, no condensation, no oil, acceleration <2G
Working environment

0-40℃, no condensation, no oil, acceleration <1G


Mechanical parameters Closed painted iron box
Fixing screws: M4 * 4
Dimension: 255*120*53mm


←[Previous:] [Next:]→

Related Products :

Easson 2D software

Easson 2D software

Easson VMM Portable 2010

Easson VMM Portable 2010

CNC Vision Measurement Machine SP-3020/SP-4030

CNC Vision Measurement Machine SP-3020/SP-4030

VMM C-2515/C-3020/C-4030

VMM C-2515/C-3020/C-4030

Easson Vision Measurement Machine EV-3020

Easson Vision Measurement Machine EV-3020

UWC 4000i Controller for CNC Vision Measurement Machine

UWC 4000i Controller for CNC Vision Measurement Machine
Home   |    About Us   |    Products   |    Service   |    FAQ   |    News   |    Contact Us   |    SiteMap
Copyright (c) 2020 Han Machinery CO.,LTD All Rights Reserved